| *SAME PERFORMANCE as single channel probe head
This DUAL CHANNEL RF probe head consists of two separate probes mounted on a single holder. One probe is fixed to the holder; the other is adjustable. Each probe may be individually configured with GSG, GS, or SG footprints. The probe to probe (signal to signal) spacing is user adjustable over a 4000 micron (160 mil) range. When ordering, an initial setting (up to .75 inches) should be specified. The spacing is measured as the distance between the signal contacts of each probe.
With its individually spring loaded Beryllium-Copper tips this probe head provides reliable contacts, even when probing non-planar structures. This reliable low resistance contact is one of the keys to providing highly repeatable measurements. Direct viewing of probe tips allows accurate positioning.
Any pitch (tip spacing) from 50 to 1250 microns may be specified. Pitches greater than 1250 microns are available on special order. Head can be configured with Ground-Signal-Ground (G,S,G), Ground-Signal (G,S), or Signal-Ground (S,G) tip footprints.
Connection is through a female K connector (2.9mm) which is 3.5mm connector compatible. |
